News

In recent years, gantry CNC cutting machine has been favored and supported by many manufacturers, and is widely used in various fields. In the first half of 2022, we also received a large number of orders for gantry CNC cutting machines, and after-sales experience solved these factors. Do customers experience glitches immediately after purchasing equipment? Most of the reasons are poor equipment maintenance. The daily sustainability and sustainability of gantry CNC cutting machines cannot be ignored. Convenient equipment maintenance can reduce the number of obstacles when using equipment. It can extend the service life of the equipment and bring many commercial benefits.

First of all, the operator needs to have specific skills, and to a certain extent, understand the mechanism, working principle, performance characteristics and various aspects of the gantry of the CNC cutting machine, and practice before use.

Check wiring and gas problems before using the instrument. If a leak is detected, the power supply will not change.

Make sure that there are no foreign objects near the machine to prevent collisions.

A series of transfer operations need to be performed to prevent unnecessary data loss.

Rails and fodder should not be cleaned with dirty water or dirt. If contaminated, use clean lint to clean and remove excess cotton soaked in oil.

When programming, the operator needs to program the program in strict accordance with the programming format provided by the gantry CNC cutting machine, and the wrong program will send an alarm to the system.

Note that the conductive block has good conductivity and friction between the beds. The platform pad should be separated from the bed. Stepper motors need to be free. The stepper motor ensures that there is no sewage.

Maintenance of the radio system

Dust and debris from driveways are often used to prevent respiratory aging.

You should always check the gas circuit system in order to deal with inappropriate fuel and components in time to ensure smooth air flow.

Anti-backfire device is an important part to ensure safety. It is strictly forbidden to disassemble the anti-backfire device according to the requirements of the safety department. Therefore, the anti-flashback device uses an extended air resistance to prevent unnecessary or leaking air flow.

When the operator starts to work, be sure to turn off all power and air lines, and stop the gantry CNC cutting machine at a specific position.